Thank you for downloading Autodesk AutoCAD^® Architecture^® 2017 Service Pack 1

This readme contains the latest information regarding the installation and use of the Service Pack. We strongly recommend that you read the entire document before you apply the Service Pack to your product. For reference, save or print this document.

Contents

• Who Should Install This Service Pack?
• Primary Issues Resolved by This Service Pack
• Problems Reported with the Customer Error Reporting Utility
• General Service Pack Updates
• General Installation Information
• Before You Begin
• About Windows Command Line Switches
• Installation Instructions
  • Apply This Service Pack to a Stand-Alone Installation
  • Apply This Service Pack Through a Local Network
  • Apply This Service Pack to a Network Administrative Image
  • Uninstall This Service Pack

You can apply this Service Pack to the following Autodesk products running on all supported operating systems and languages. Be sure to install the correct Service Pack.

32-bit Product	Service Pack
Autodesk AutoCAD Architecture 2017	AutoCAD_Architecture_2017_SP1_x86.exe

64-bit Product	Service Pack
Autodesk AutoCAD Architecture 2017	AutoCAD_Architecture_2017_SP1_x64.exe

This Service Pack can be applied to AutoCAD Architecture 2017 installed as a standalone application as well as AutoCAD Architecture 2017 installed from the following Autodesk Design Suites.

• Autodesk Building Design Suite 2017
• Autodesk Factory Design Suite 2017

Return to Top

Note: Unlike the previous service packs, this service pack DOES NOT include AutoCAD 2017 Service Pack 1. We recommend that you install AutoCAD 2017 Service Pack 1 before installing AutoCAD Architecture 2017 Service Pack 1. Refer to the AutoCAD 2017 Service Pack 1 readme for more information. Installing AutoCAD Architecture 2017 Service Pack 1 without installing AutoCAD 2017 Service Pack 1 can cause unexpected issues. Some Architecture defect fixes require AutoCAD Service pack 1 to be installed.

• Problems Reported with the Customer Error Reporting Utility
• General Service Pack Updates

As a result of the detailed information that we received from customers who used the Customer Error Reporting Utility, we were able to identify and fix a number of problems. Updates were made to the following commands and features:

Project Navigator

• There were occasional crashes when opening a drawing which has camera view from Sheets tab in Project Navigator.

Return to Top

The following defects have been fixed:

AutoCAD Integration

• Application hangs when switching between Model Space and Layout in some drawings.

Section

• Application hangs when a drawing is saved in Front view after creating a Section line.
• Section line is seen as continuous linetype in Front view.

Project Navigator

• New sheets created in Project Navigator do not appear until project is refreshed.

Display Representation

• In some drawings the display is corrected.
• In the "Display Properties" dialog box, transparency settings are not saved.

Migration

• "Migrate from previous Release" option will suppress "Manage content Library" dialog in the Styles Browser.

Mass Element

• Trimming or Splitting of mass elements does not work in non-default UCS.

Schedule Tables

• Schedule table has incorrect results when converted or exported to an excel table.

Return to Top

• Before You Begin
• About Windows Command Line Switches

Return to Top

Before you install this Service Pack, review the following information:

Back Up Custom Files

It is recommended that you create backups for all custom CUIx, MNR, and MNL files before you apply this Service Pack.

Administrator Privileges

During installation, you will be prompted for the original installation media or a network image. To apply this Service Pack, you must have administrator privileges to install and uninstall products.

Network Deployment

Administrators can deploy this Service Pack over a network using the Deployment Wizard.

About Your Product

After you install the Service Pack, updated product information displays in the About dialog box.

Reboot

After you install this Service Pack, it is recommended that you reboot your system even if you are not prompted to do so.

Return to Top

The following Microsoft Windows command line switches are built into this Service Pack:

• /e – Extracts the MSP file from the Service Pack executable file.
• /q – Suppresses the completion message after the Service Pack is applied. This is useful if you use a script or batch file to apply this Service Pack to multiple computers.

Instructions about how to use the /e command line switch are included in the installation procedures that follow.

Return to Top

• Apply This Service Pack to a Stand-Alone Installation
• Apply This Service Pack Through a Local Network
• Apply This Service Pack to a New Network Administrative Image
• Uninstall This Service Pack

Follow these instructions to install this Service Pack on a single computer.

1. Download this Service Pack and save it to any folder.
2. If required, insert the product media (for example, the AutoCAD Architecture 2017 installation disc).
3. Find the folder where you saved the Service Pack and double-click the executable (EXE) file.

Return to Top

Follow these instructions to install this Service Pack on multiple computers using your local network.

1. Download this Service Pack and save it to any shared folder on your local network.
2. Find the shared folder where you saved the Service Pack, and double-click the executable (EXE) file.

Note: Installation through your local network using the CAD Manager Control Utility is not supported for this Service Pack.

Return to Top

The following distribution method applies only to administrative images created with the Deployment wizard.

1. Navigate to the folder where the deployment is saved.
2. Open the Tools folder under the Deployment folder, and launch the “Create & modify a deployment” setup.
3. Follow the Install Deployment wizard with default settings, and click Create. Then click the Add Updates button.
4. In the Autodesk AppModeDeployment Updates dialog box, click UPDATES, and then the Add button to the Service Pack 1 that you want to add. Make sure the Status has changed to “Included” and the Add button becomes Remove. Then Close the dialog box.

Note: When the AutoCAD Architecture Service Pack is included in a deployment, the deployment will install the Service Pack.

Return to Top

Windows 7 / Windows 8.1 / Windows 10

1. Click Start and then Control Panel.
2. Click Programs.
3. Click Programs and Features.
4. Find the appropriate Service Pack in the list of updates. Click Uninstall.

Return to Top

We want to express our appreciation to all our customers who identified these issues and reported them to us. Their reports gave us the opportunity to improve the product for everyone's benefit. We also thank you for your continued business, and for your feedback regarding this release.

Respectfully,

The Autodesk AutoCAD Architecture Product Team

Return to Top

Copyright ©2016 Autodesk, Inc.