Thank you for downloading the Autodesk® Revit® LT 2018.1.1 Hot Fix.
This readme contains the latest information regarding the installation and use of this hot fix. It is strongly recommended that you read this entire document before you apply the hot fix to your licensed copy of Autodesk Revit LT 2018. After this hot fix is applied successfully, the build number specified on the Help > About dialog will be 18.1.1.18. For reference, you should save this readme to your hard drive or print a copy.
Issues resolved by this hot fix
This hot fix addresses issues and crashes reported directly to Autodesk and contains the fixes included in the Revit LT 2018.0.1 and 2018.0.2 Hot Fixes as well as the Revit LT 2018.1 Update. Consult the release notes for all areas improved by this hot fix.
Contents
This hot fix is for the following Autodesk products running on all supported operating systems. Be sure to install the correct hot fix for your software.
|
Product |
Hot Fix |
|
Autodesk Revit LT 2018 |
Autodesk_Revit_LT_2018_1_1.exe |
|
AutoCAD Revit LT Suite 2018 |
Autodesk_Revit_LT_2018_1_1.exe (Note that this hot fix will only update the Revit LT 2018 portion of your suite product.) |
This hot fix can be used with the following operating systems:
As you prepare to install this hot fix, keep the following in mind:
Administrative privileges
In order to apply this hot fix, you must have administrative privileges to install and uninstall products.
Product media
Under some circumstances, you may be asked to provide the original installation source.
If you installed Autodesk Revit LT 2018 from the DVD or USB, you may be asked to insert the disk or USB during installation of the hot fix. Please have the disk or USB available before starting.
If you downloaded and installed Autodesk Revit LT 2018 from the web and later deleted the extracted files (default location of extracted files is C:\Autodesk\WI\Autodesk Revit LT 2018), the hot fix installation may not be able to continue. In that case, you should follow these steps:
- Obtain the Web download file and save it to your computer.
- Double click the download file and allow it to extract its files, noting where they are being saved.
- When the Autodesk Revit LT installer screen appears, click "Cancel".
- Continue with hot fix installation as described in the installation instructions.
Backup custom files
Back up all customized files, such as Revit.ini, before starting.
Follow these instructions to install this hot fix on a single computer.
Note: This hot fix cannot be uninstalled to revert Autodesk Revit LT 2018 to its pre-hot fix state. If you need to remove the hot fix, please uninstall Autodesk Revit LT 2018 and then reinstall it.
Copyright © 2017 Autodesk, Inc.