Autodesk
® River and Flood Analysis Module 2019.1 Update for Civil 3D 2019 Release Notes
Thank you for downloading the Autodesk® River and Flood Analysis Module 2019.1 Update for Civil 3D 2019.
This release note contains the latest information regarding the installation and
use of this extension. It is strongly recommended that you read this entire
document before you apply this extension to your product. For reference, you should save this document to your hard drive or print a copy.
Contents
You can apply this extension to the following Autodesk products running on all
supported operating systems and languages. Be sure to install the correct
extension for your software.
- Autodesk® Civil 3D® 2019
- Autodesk® Civil 3D® 2019 with the Autodesk® River and Flood Analysis Module 2019 installed
Return to Top
The Autodesk® River & Flood Analysis Module is a sophisticated river modeling software package that supported HEC-RAS within the Autodesk® Civil 3D® environment. The Autodesk River & Flood Analysis module makes it easier than ever before to compute water surface profiles for modeling rivers, bridges, culverts, spillways, levees, floodplain and floodway delineations, stream diversions, channel improvements, and split flows.
Key Features:
- Automate HEC-RAS cross section cutting, water surface analysis, flood plain mapping, and all related modeling tasks.
- Utilize numerous automation mapping tools for extracting cross sections from various digital terrain sources including contours, TINs, DTMs, DEMs, LiDAR data, survey files, surveyed cross sections, etc.
- Perform sophisticated bridge and culvert analysis as well as automating the process of designing and analyzing roadway crossings.
- Automate mapping of bank station locations, channel and overland flow lengths, levee locations, ineffective flow areas, Manning’s roughness data from topographic map data.
- Perform automated bridge scour computations for FHWA and state DOT roadway studies.
- Automatically generate floodplain and floodway maps, ready for FEMA and other agency submittals.
The following issues have been resolved in this update:
- An issue that caused Autodesk Civil 3D to stop responding when selecting a River and Flood Analysis command.
- An issue that resulted in an unknown publisher message requiring administrative rights to allow HRReg.EXE to run.
- An issue that caused River and Flood Analysis to interfere with ArcGIS Pro custom scripts.
Return to Top
As you prepare to install this extension, keep the following in mind:
Back Up Custom Files
It is recommended that you back up all custom CUIX, MNR, and MNL files before you apply this extension.
Administrative Privileges
During installation or uninstallation, you may be
prompted for the original installation media or a network image. In order to apply this extension, you must have privileges to install and uninstall products.
Network Deployment
Administrators can deploy this extension
over a network using the Deployment Wizard.
Close the Application
It is required that you close Autodesk Civil 3D 2019 before proceeding with the installation of this extension.
Reboot
After you install, it is recommended to reboot your system even if not prompted.
About Your Product
After you install, product information is displayed in the About dialog box.
Return to Top
Apply This Extension to a Stand-Alone Installation
Follow these instructions to install this extension on a single
computer.
- Download the extension and save it to any folder.
- Close all running Autodesk applications.
- Find the folder where you saved the extension and double-click the
executable (MSI) file.
Return to Top
Apply This Extension Through a Local Network
Follow these instructions to install this extension on multiple computers using your local network.
- Download this extension and save it to any shared folder on your local network.
- Close all running Autodesk applications.
- Find the shared folder where you saved the extension, and double-click the executable (.msi) file.
Return to Top
Apply This Extension to a Network Administrative Image
The following method of distributing the Autodesk River and Flood Analysis Module applies only to administrative images created with the Autodesk Civil 3D 2019 Network Installation wizard. After you complete this procedure, any new deployments of Autodesk Civil 3D 2019 will have the extension applied to them automatically. For complete information on creating and updating a Network Administrative Image please see the Autodesk Installation Administrator's Guide.
To apply the Autodesk® River and Flood Analysis Module to an existing Autodesk Civil 3D 2019 administrative image:
- Download this extension and save it to any shared folder on your local network.
- Close all running Autodesk applications.
- On the workstation where you initially created the Autodesk Civil 3D 2019 deployment, open the Tools folder and double-click the Create & Modify a deployment shortcut icon.
- Follow the wizard to the product configuration screen and expand the Include additional software accordion.
- In the Additional Software section, click Add and browse to the location you saved the extension.
- Collapse the Include additional software accordion and click the Create button.
Now any new deployments of Autodesk Civil 3D 2019 will have the extension applied to them automatically.
Return to Top
This extension can be uninstalled through the Program and Features section of the Microsoft® Windows® Control Panel.
Follow these instructions to uninstall this extension on a single computer.
- Insert the product media (for example, the Autodesk Civil 3D installation disc) or make sure the installation source files are available.
- In Windows Control Panel > Program and Features, click on the Autodesk® River and Flood Analysis Module 2019 and choose the Uninstall option.
- In the Autodesk River and Flood Analysis Module 2019 maintenance dialog box click Yes to confirm that you want to uninstall the extension.
Return to Top
Copyright © 2019 Autodesk, Inc.