Autodesk Inventor Nesting 2023

As part of its ongoing commitment to high-quality products and services, Autodesk has released Autodesk Inventor Nesting 2023. This Readme contains important information about new features and known issues in this release.

Nesting 2023 can be installed on Inventor 2021, Inventor 2022 and Inventor 2023.
To support Sheet Metal Mark feature, add the mark layers to the default extract configuration file.
Support license idle mode state.
Include part Length and Width dimensions on Nest Report.

Inventor does not export a Nest Sheet to DXF the first time it tries.
Unexpected material mapping appear when re-translate source files.
Remnant Optimization is broken in some case.
Packaging name missing on nest header in graphics.
Incorrect result (part missing) after Create 3d Model using "Multi-body part file" option.
No shapes are appear in graphics after translation with some assembly files.
Relative path of inest file and its sources files is not saved correctly.
Create Nesting Study failed in some case.
Blind pockets and cut outs got extracted into nesting for file reverted from Revit.
Master multibody part is corrupted if set the original file at the same direction with saved nesting assembly and inest files.
Multi-select Sheet nodes to do Export DXF together, the generated dxf file may show the wrong shape names.
Weird view shows in graphics with 3D Detailed display option for inventor pat with generic cad provider.
Remove unused option for output tab in Create Nesting Study.

if open inest file get "Some source files are missing", please resolve the missing source files, then resave it and then next time open the inest file will work well.
Nest doesn't support Inventor Model States.
Sources command crashes Inventor for certain files.
If Decimal symbol is "," and Digit grouping symbol is "." then HTML Nest Reports created are black.
The context menu disappears when right clicking the column header in the assembly BOM or open from Vault dialog.
Check-in source file under Vault tab in iNest file failed, please open source file, check-in to Vault, or open Vault application to check-in the source file.
If launching Vault from Inventor fails, please launch Vault directly.
After upgrading from 2021 to 2023, if you want to use the customer configuration created in 2021, copy the folders from "C:\Users\%username%\Documents\Autodesk\Inventor Nesting 2021" to "C:\Users\%username%\Documents\Autodesk\Inventor Nesting".
Adding the same shape but with different parameters to the Edit Nest dialog is not allowed.
Check-in of an INEST file will be blocked if its source IAM or IPT file is not checked in.
If translation fails with the message "Problems encountered while saving the document", go to "C:\ProgramData\Autodesk\Inventor Nesting 2022(or 2023 depends on the version you are using)\Sources\" and remove any unnecessary files.
Some tables and graphs in the Example-template-full report template are empty. Use the default template (automatically loaded) instead.
Cannot author a sketch containing a spline.
Creating a 3D Model of a sheet as an assembly leaves invisible documents behind in memory. Use File > Close all to close these lingering documents.
Turning on the Rotate 90, 180, 270 values for a nest has no effect if these rotate parameters are turned off in the nest's material definition.
In the Create New File dialog box, only one template might be shown. Browse to the appropriate language folder to see all available templates.
Multiple contours in DXF files will be treated as a single shape for nesting.
Material and unit of the IPT source file cannot be modified in Inventor Nesting and therefore must be set in the IPT file itself. When you delete a material used by an IPT source file, you need to re-extract shapes from the IPT to restore the material.
CSV export does not currently support field separators within values.
To avoid read-only messages, be sure to start AutoCAD prior to opening a DXF source file from within Inventor Nesting (this is standard AutoCAD behavior).
The 3D Model command sometimes misses the external boundary of some nested parts.
Warning and error messages displayed during shape extraction and nesting are not localized.
Splines in a DXF file are only extracted after conversion to polylines by first saving the DXF file in R12 format.
Changing the default INEST template unit doesn't work.
Layer names cannot contain spaces.
Localization is not supported when editing configuration files for layer extraction.
Undo and Redo might not always work as expected.
In 3D Detailed/Compare View, switch configuration file, then re-extract source file, INV crash when Update command running.

Return to Top

We thank all of our customers who identified these issues and reported them to Autodesk. These reports give us the opportunity to improve the product and provide you with the best solutions in mechanical design. Autodesk also thanks you for your continued support and feedback regarding the content of this release.

Respectfully,

The Autodesk Inventor Nesting Product Team

Return to Top

What's New

Summary of Fixed Issues

Summary of Known Issues

Thank You...